ACDelco 41-162 - GM Original Equipment™ Spark Plug - Iridium
$1149
In stock
limited availability at this price!
Pay over 3-12 months with 
. Learn more
. Learn more
ACDELCO part description
GM Original Equipment™ Spark Plug - Iridium
Product Description
Spark Plug
Product Attributes
| Weight (lb) | 0.1 lb |
| Center Electrode Design | Fine Wire |
| Reach | 0.689 IN |
| Insulator Height | 0.972 IN |
| Center Electrode Core Material | Copper |
| Ground Electrode Quantity | 1 |
| Height (in) | 1.06 in |
| Thread Pitch (in) | 1.25 in |
| Width (in) | 3.56 in |
| Length (In) | 4.13 IN |
| Hex Size (mm) | 16 MM |
| Reach | 17.5 MM |
| Insulator Height | 24.7 MM |
| Electrical Terminal Type | Non-Removable Nut |
| Spark Plug Approximate Resistor Value | 4000-7500 ohms |
| Product Description | ACDelco GM Original Equipment Iridium Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They are our latest in spark plug technology and an exact replacement for your vehicle's original components. Iridium composition provides a high melting point and great strength, and provides excellent wear resistance and durability. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional. ⚠<b> WARNING:</b> Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Chipped or broken insulator tips |
| Good Maintenance Practices - Section 1 - Bullet 5 | Apply dielectric grease into the boot area to reduce the chance of exterior tracking on the buttress tower of the spark plug. This grease also promotes a good heat transfer between the spark terminal screw and boot terminal. |
| FAQ - Question 4 | Are ACDelco spark plugs pre-gapped? |
| Good Maintenance Practices - Section 1 - Bullet 2 | Brush or air blast dirt away from the well areas before removing spark plugs. CAUTION: Use goggles to protect eyes from debris when applying compressed air to spark plug wells. |
| FAQ - Question 7 | Can I just clean my spark plugs instead of replacing them? |
| Features & Benefits - Bullet 6 | Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional |
| Features & Benefits - Bullet 7 | ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors. |
| Features & Benefits - Bullet 5 | Iridium plugs are laser-welded which provides precision welds, reduces excess debris and wear rate, thus increasing durability |
| FAQ - Question 3 | Does a diesel engine require a different type of plug than a gas engine? |
| FAQ - Question 8 | Does ACDelco have marine spark plugs? |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Cracks in the upper or lower portion of the spark plug insulator |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Lack of acceleration or loss of speed when driving uphill under load |
| Good Maintenance Practices - Section 1 - Bullet 1 | Grasp the spark plug boot and gently rotate it 90 degrees counterclockwise. Pull the spark plug boot and cable away from the spark plug. If necessary, use a spark plug boot removing tool. DO NOT grab or violently pull spark plug cables |
| Good Maintenance Practices - Section 1 - Bullet 7 | Install spark plugs or glow plugs to the proper torque per the manufacturers’ specification. |
| Center Electrode Tip Material | Iridium |
| Features & Benefits - Bullet 2 | Iridium composition provides a high melting point and great strength, helps to provide excellent wear resistance and durability |
| Features & Benefits - Bullet 1 | Iridium is the latest in spark plug technology and is an exact replacement for vehicles original components |
| Features & Benefits - Bullet 3 | Iridium offers excellent engine idle stability, reliable cold starting, quick acceleration and smooth performance |
| FAQ - Question 1 | Is there a recommended interval for changing my vehicle’s spark plugs? |
| Features & Benefits - Bullet 8 | GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle |
| FAQ - Answer 7 | No, cleaning your old spark plugs is not recommended. Dirty, fouled spark plugs may also have broken or chipped insulator tips, worn electrodes, or worn or missing side wires. These conditions severely affect spark plug performance. Replace your dirty, fouled spark plugs with new ACDelco spark plugs. |
| FAQ - Answer 5 | Not always, but you should inspect your spark plug wires for wear when replacing your spark plugs. Refer to your vehicle owner’s manual or contact the manufacturer for more information. |
| Ground Electrode Tip Design | Platinum |
| Good Maintenance Practices - Section 1 - Bullet 4 | Remove each spark plug and place each one in a tray by cylinder number. This will help identify and relate any unusual condition to the cylinder involved. |
| FAQ - Question 2 | Should I change all of my vehicle’s spark plugs at the same time? |
| Signs of Wear & Troubleshooting - Section 1 - Header | Signs of wear for spark plugs include but are not limited to: |
| Ground Configuration | Standard |
| Features & Benefits - Bullet 9 | GM regularly updates production and service part designs to integrate new materials and technologies |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Damaged spark plug boots |
| Seat Type | Tapered |
| Features & Benefits - Bullet 4 | Three Piece Fired in Suppressor seal meters spark energy for long electrode life, helps prevent combustion leakage and helps block radio frequencies that can affect vehicle electronics |
| Good Maintenance Practices - Section 1 - Bullet 3 | Use the correct deep socket size to loosen each spark plug one or two turns. NOTE: To remove spark plugs from aluminum heads, allow the engine to cool. The heat of the engine, in combination with a spark plug that is still hot, may cause the spark plug threads to strip the cylinder head upon removal. |
| Good Maintenance Practices - Section 1 - Header | Visually inspect spark plugs for signs of wear. Follow these steps for removing spark plugs for inspection, servicing or replacement: |
| FAQ - Question 6 | What is pre-ignition and can it damage my engine? |
| FAQ - Question 5 | When I replace my spark plugs, should I also replace my spark plug wires? |
| Resistor Type | Yes |
| FAQ - Answer 8 | Yes, ACDelco has marine spark plugs for many applications. |
| FAQ - Answer 2 | Yes, if it is the scheduled time for spark plug replacement. It is okay to replace one spark plug if it is fouled or damaged prior to scheduled maintenance, provided the source of the damage is found and corrected. |
| FAQ - Answer 6 | Yes, pre-ignition can cause serious damage to your engine. Pre-ignition is the ignition of fuel before the actual spark occurs, which causes a rapid temperature rise in the combustion chamber that can damage engine components and melt spark plug electrodes. Causes of pre-ignition include but are not limited to a buildup of deposits that can become incandescent in the combustion chamber, improper installation torque being applied to spark plugs, and having spark plugs with a heat range that is too hot for the engine’s operating condition. |
| FAQ - Answer 1 | Yes, this interval depends on what type of spark plug your vehicle requires. Refer to your owner’s manual or contact your vehicle’s manufacturer for more information. |
| FAQ - Answer 3 | Yes. Diesel engines require glow plugs because diesel engines operate differently than gas engines. ACDelco Professional Glow Plugs are specially designed to give diesel engines the heat they need for their cold starts. Refer to your owner’s manual or contact your vehicle’s manufacturer for more information. |
| FAQ - Answer 4 | Yes. When ACDelco spark plugs are manufactured, they are pre-gapped to the correct gap specification. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Your engine having trouble starting, hesitating, or cutting out |
| Good Maintenance Practices - Section 1 - Bullet 6 | Before installing new spark plugs, use a gap guide to make sure your new spark plugs have the correct gap. NOTE: ACDelco GM OE Iridium Spark Plugs are pre-gapped during manufacturing. Never attempt to gap an ACDelco GM OE Iridium Spark Plug. You could damage the spark plug. Replace any incorrectly gapped ACDelco GM OE Iridium Spark Plugs with plugs that are correctly gapped. |
| Ground Electrode Core Material | Copper |
| Ground Electrode Tip Material | Platinum |
| Hex Type | Hex |
| Indexed | No |
| Manufacturer Heat Range | 14 |
| Pre-Gap Size | 0.040 IN |
| Pre-Gap Size | 1.02 MM |
| Skirt | No |
| Thread Diameter | 14.0 MM |
| Washer(s) Included | No |
Additional Information
| Warranty Special | 7 Years/Unlimited Miles Limited Warranty (Parts Only). Please see ACDelco.com for more details|84 Months/100,000 Kilometers Limited Warranty (whichever ever comes first, parts Only). Please see ACDelcocanada.com for more details |
| Harmonized Tariff Code (HTS) | 8511100000 |
| Country of Origin (Primary) | US |
| Warranty Special UOM | TX |
| UPC | 00808709886594 |
A true OEM auto parts brand for GM and non-GM vehicles, ACDelco® offers a wide portfolio of parts designed to keep vehicles on the road longer. These parts work precisely and fit perfectly because they are designed, engineered, tested, and backed by General Motors. But ACDelco also carries aftermarket components that go through the same 18-step quality approval process as the OE parts. Whether customers choose OE or aftermarket, they’d get the same reliable performance, precise engineering, and superior reliability for years to come. ACDelco’s expansive product portfolio includes alternators, filters, batteries, brakes, belts and hoses, oil and fluids, and suspension parts. These products are made to meet GM and non-GM vehicles’ ever-evolving powertrain, collision, maintenance, and repair needs.
California residents see Prop 65 Warning(s)
Don't know your part number?
Take a photo and we'll identify it!
